From Lignomat: Thermo-Hygrometers TH and PN (1 page)

HOME	PRODUCT INFORMATION	SUMMARY OF ALL METERS

Thermo-Hygrometer - a great addition to your moisture meter

"Air" affects wood moisture.

Dry lumber will pick up moisture if stored in a moist place. Beautiful wood floors will cup when ambient conditions change. Furniture suffers severe damage when moving from a wet climate to a dry climate. Chairs may have loose joints, cabinet doors may not close. Even a piano can be out of tune from too much moisture. For lived-in areas at 70^o F (20^o C) and 35% rel. humidity, wood stabilizes at 6-8%. Changes of these conditions can cause shrinking, cracking or warping.

We recommend the PN Hygrometer for low relative humidity readings and a short response time.

For more information ask about Lignomat's leaflet: "Moisture Problems and Helpful Hints"

For more accurate measurements use Ligno-Tec RH with the precision RH BluePeg Sensor. Ligno-Tec RH measures relative humidity and temperature, calculates DewPoint Temperature and GPP. Quality and Design by Lignomat.

Or better yet, use the Memo-Chip BL2 to record relative humidity and temperature in preset time intervals for days, weeks, months or years.

Description	Item
Thermo-Hyrgometer TH	TH
Thermo-Hygrometer PN	PN
Ligno-Tec RH plus RH Blue-Peg	T-1B



	PIN METERS

	mini-Ligno DX/C

	mini-Ligno DX

	mini-Ligno E/D

	mini-Ligno C

	mini-Ligno E/C


	Packages mini-Lignos

	Lignometer K



	ACCESSORIES
	Electrodes, Cables,
	Pins, In-Kiln Probes


	PIN / PINLESS METER


	Ligno-VersaTec


	PINLESS METERS





	Product Information

	Summary all Meters

	Home

Specifications for Thermo-Hygrometers

TH:

Indicates Temperature, Humidity and Time

Temperature: 14^oF-122^o F (-10^oC-50^oC)

Switch for ^oF or ^oC.

Relative Humidity: 20-90%.

Response time up to 5 min.

Memory: Highest and lowest values for temperature and humidity

Time: Clock selectable for 12 / 24 hour time set.

Built-in tilt stand, wall mounting bracket.

PN:

Indicates Temperature and Humidity

Temperature 14^oF-122^o F (-10^oC-50^oC)

Switch for ^oF to ^oC.

Relative Humidity: 5-95%.

Response time 80 seconds.

Memory: Highest and lowest values for temperature and humidity

Ideal to obtain readings in hard to reach places: Shaped as a pen to fit in small areas. HOLD button to view readings after measurements have been taken. With Belt Clip.

Specifications RH BluePeg Sensor: Relative Humidity: 0 to 100%, resolution 0.1%

+/-1.8% for 10-90% ~ +/-3% below 10%, above 90%

Temperature: -30⁰F to 200⁰F, resolution 0.1% +/-0.5⁰F for 32-120⁰F ~ +/-1⁰F < 32⁰F% and >120⁰F

Indicates Dew Point Temperature and GPP

Size: 1.75 long and 0.5" diameter

Connector: easiest to connect 3.5 mm reliable stereo jack

Detachable RH BluePeg Sensor: For connection use RH Adapter, RH Cable or RH Cap Cable