HOME

PRODUCT INFORMATION

SUMMARY OF ALL METERS

Ligno-DuoTec BW: a meter for concrete and wood

The Ligno-DuoTec BW is is a meter designed 
for contractors, Floor Covering Installers and Restoration.

Wood in Scan Mode:

The DuoTec BW gives moisture readings in 
percent for wood. Corrections for different wood species are built-in for specific gravities 
between 0.3 and 1.0

Building Materials in Scan Mode:

The DuoTec BW has a calibration built-in for comparative readings for concrete and 
sheetrock. For all other building materials
the reference scale can be used to identify 
moisture.

Concrete in RH Mode:

This meter can also be connected to the 
RH BluePeg sensor for in-situ measurements that conform to ASTM F 2170

For more info see Specifications and Description below.

For RH capabilities only: LignoTec RH

For a meter that does it all: Ligno-VersaTec

For a basic pin meter: mini-Ligno S/D

Description

    Item

  Ligno-DuoTec BW, building materials and RH connector 

BW

 Ligno-DuoTec BW, RH BluePeg, 10 RH-S, Cables, Case 

BW-1KC
     

  RH BLUEPEG METERS

Ligno-Tec RH       

Ligno-VersaTec       

ACCESSORIES

RH BluePeg

RH BluePeg Pro Packages 

  Thermo-Hygrometers

  Product Information 

Summary all Meters

Specifications for BW-1KC: Ligno-DuoTec BW RH BluePeg 10 RH-S, cables, case

       

PROPERTIES:

BUILDING MATERIALS IN SCAN MODE

Measuring Range:

5-99% dependent upon species setting*

Resolution:

0.1% for entire measuring range

Measuring Depth:

1/4 or 3/4" deep  (7mm and 20 mm)

Reference Scale:

0-99 for non-wood building materials, 0-99 for concrete, 0.4-2.0 for gypsum

Battery:

one 9V battery

Size:

2.5"x 4.75"x1" (60x120x25mm) 

Weight :

8 ounces (200g)

RH BluePeg:

 RH BluePeg probe required for relative humidity testing in concrete

Calibration Check:

The calibration is internally checked before each reading for pin and pinless mode, 

and automatically adjusted if necessary.

PROPERTIES: RH Mode

 

Using RH probes in concrete is the ASTM approved method to test concrete before installing any type of floorcovering. Lignomat's RH BluePeg is totally inside the sleeve, and therefore can be left until the test is finished, removed and reused.                   RH Range: 0-99%,  Temp: 0 to 200 degrees F or -15 to 95 degrees C.              

The Package BW-1KC consists of the LignoDuoTec BW, RH BluePeg, RH cable, 10 RH Sleeves and caps and the Case S.

The Ligno-DuoTec BW was designed for reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage.

Fast scanning of all flat surfaces of non-wood materials. Detection of different moisture levels in drywall, concrete, etc.

RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hone in the testing area.

Operation is that easy! Without studying pages and pages of operation manuals: Depress SET Button to check settings. Use up or down buttons to correct settings. Depress % Button for moisture readings. Instrument turns itself off automatically. At any time you can change from pin mode to scan mode by depressing up or down button.

We use our experience and expertise to manufacture moisture meters 

that are consistently reliable and accurate.

                   

RH BluePeg

The RH BluePeg is a sensor for relative humidity and temperature. Readings can be obtained wirebound with the LignoTec RH, Ligno-DuoTec BW and  Ligno-VersaTec.

The RH BluePeg conforms to the ASTM F2170 standard test method for determining the RH in concrete floor slabs.

RH BluePeg

RH BluePeg 5 pack

RH Cable for Lignomat Meter    

RH Sleeves 20 Pack    

Case

The black hardshell case has a double wall for sturdiness and a

foam insert for protection:

For Ligno-DuoTec BW, RH BluePeg, cable, sleeves and caps

 

Case S