Ligno-Tec RH

HOME	PRODUCT INFORMATION	SUMMARY OF ALL METERS

Ligno-Tec RH: a meter for concrete

The Ligno-Tec RH is a meter designed for contractors, floor covering installers and restoration to be used in connection with the RH BluePeg Sensor for in-depth moisture measurement in concrete

Concrete in RH Mode:

The meter has a connection built-in for the RH BluePeg sensor to take in-depth moisture measurements that conform to ASTM F 2170

Other Options for meters are:

For a meter that does it all: Ligno-VersaTec

For a scan meter, that does RH: Ligno-DuoTec BW

For a basic pin meter: mini-Ligno S/D

Description	Item
Ligno-Tec RH meter only	T
Ligno-Tec RH, 1 RH BluePeg Sensor, 1 Adaptor (Thermo-Hygrometer)	T-1B
RH Package: Ligno-Tec RH meter, 1 RH Sensor, RH Cable, RH Adaptor, 10 Sleeves in pouch	T-1KP



	RH BLUEPEG METERS
	Ligno-DuoTec BW

	Ligno-VersaTec

	RH BluePeg Concrete Packages


	ACCESSORIES
	RH BluePeg



	Thermo-Hygrometers





	Product Information

	Summary all Meters



	Home

Specifications Ligno-Tec RH

PROPERTIES:

BUILDING MATERIALS IN SCAN MODE

Resolution:

0.1% for entire measuring range

Measuring Depth:

1/4 or 3/4" deep (7mm and 20 mm)

Reference Scale:

0-99 for non-wood building materials, 0-99 for concrete, 0.4-2.0 for gypsum

Battery:
one 9V battery

Size:

2.5"x 4.75"x1" (60x120x25mm)

Weight :

8 ounces (200g)

RH BluePeg:
RH BluePeg probe required for relative humidity testing in concrete

Calibration Check:

The calibration is internally checked before each reading for pin and pinless mode,

and automatically adjusted if necessary.

PROPERTIES: RH Mode

Using RH probes in concrete is the ASTM approved method to test concrete before installing any type of floorcovering. Lignomat's RH BluePeg is totally inside the sleeve, and therefore can be left until the test is finished, removed and reused. RH Range: 0-99%, Temp: 0 to 200 degrees F or -15 to 95 degrees C.

The Package T-1KP consists of the LignoTec RH, RH BluePeg, RH cable, 10 RH Sleeves and caps and a carrying pouch.
The Ligno-Tec RH was designed for reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage.
RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hole in the testing area.
Operation is that easy! Without studying pages and pages of operation manuals: Depress SET Button to check settings. Use up or down buttons to correct settings. Depress % Button for moisture readings. Instrument turns itself off automatically. At any time you can change from pin mode to scan mode by depressing up or down button.

We use our experience and expertise to manufacture moisture meters

that are consistently reliable and accurate.

RH BluePeg		The RH BluePeg is a sensor for relative humidity and temperature. Readings can be obtained wirebound with the LignoTec RH, Ligno DuoTec BW and Ligno-VersaTec. The RH BluePeg conforms to the ASTM F2170 standard test method for determining the RH in concrete floor slabs. RH BluePeg RH BluePeg 5 pack RH Cable for Lignomat meter RH Sleeves 20 Pack
Pouch		For convenient storage we are now offering a pouch with wrist strap, which can contain a mini-Ligno or Ligno-Tec meter plus the Electrode E14C including the EL pins or everything necessary for RH measurement in concrete. Pouch P
Case		The black hardshell case has a double wall for sturdiness and a foam insert for protection: For Lignometer KF or C, Electrode E12 and BNC Cable. (Scanner, Thermo-Hygrometer and/or Electrodes E16 can be added and fit into case M.) Case M: Size 13"x10"x4" (33x25x10cm)