From Lignomat: mini-Ligno E/C with Depth Electrode E12 (3 pages)

HOME	PRODUCT INFORMATION	SUMMARY OF ALL METERS

mini-Ligno E/C, Electrode E12 in Case: Package E-2C

An important addition to your moisture meter. Moisture checks with the Electrode E12 are recommended when working with thicker lumber to detect under or unevenly dried lumber. A sure way to avoid defects such a split table tops, warped doors or carvings that are cracked, etc.

As the teflonized pins are hammered towards the core consecutive readings indicate changes in moisture.

One step up from the Package E-2C:

>> D-2C Package with mini-Ligno DX/C

Description	Item
mini-LignoE/C with built-in pins	E-1
mini E/C with Electrode E12, BNC-mini Cable, Case M	E-2C
mini E/C with Electrode E10, BNC-mini Cable, Case M	E-1C
add a Ligno-Scanner D to the mini-Ligno E/C for	D+
add a Thermo-Hygrometer TH to the mini-Ligno E/C for	TH+



	PIN METERS

	mini-Ligno DX/C

	mini-Ligno DX

	mini-Ligno E/D

	mini-Ligno

	mini-Ligno C

	mini-Ligno E/C


	Packages mini-Lignos

	Lignometer K



	ACCESSORIES

	.
	Electrodes, Cables,

	Pins, In-Kiln Probes



	PIN / PINLESS METER


	Ligno-VersaTec


	PINLESS METERS


	Ligno-Scanner


	THERMO-HYGROMETERS




	>
	Product Information

	Summary all Meters

	Home

Specifications and Description: mini E/C and Depth Electrode E12

.
Measuring Range:	6-36%
Resolution:	2% increments
Species Corrections:	1 setting for wood species corrections, Chart included
Calibration Check:	The calibration is internally checked and automatically adjusted if necessary
Pins:	2 pair of pins, measuring depth of 3/16" and 7/16" (5,10mm)
Size :	pocket-size 2 3/4"x 5"x1" (70x140x25mm)
Weight:	8 ounces (200g), made out of high-impact plastic
Accessories:	wrist strap and pouch, one 9V battery and 2 pair of pins

The E/C has the following features:

-- a unique shape that fits comfortably in your hand when measuring

-- measuring range of 6-36% wide enough for dry and wet lumber

-- bright, easy-to-read LED display

-- connection for external cables and electrode -- to check for hidden

moisture problems in thick lumber without having to cut the lumber.

For more options see >> Packages with mini-Lignos.

The functionally designed mini-Ligno E/C fits in your hand when measuring and is small enough to carry in a shirt-pocket. The green cap covers the pins during transportation and serves as a handle when pushing the pins into the wood. This unique design allows pushing behind the entire meter to insert the tapered pins easily. Longer pins are stored inside the meter for measuring thicker material. The short pins are ideal for surface or end cut readings and for veneer.

For measurements, push the pins into wood. The unique on-off switch between the pins, turns meter on automatically and bright LED lights instantly indicate moisture percentage.

An easy-to-use, reliable instrument.

Pins for mini-Lignos :

#MA Pins for a measuring depth of 3/16"

#MB Pins for a measuring depth of 7/16"

We use our experience and expertise to manufacture moisture meters

that are consistently reliable and accurate.

Over 220,000 mini-Lignos sold worldwide.

Depth

Electrode

E12

The Electrode E12 can be used for wood or soft building materials (drywall, plaster...) to a maximum measuring depth of 2" (50mm). For up to 7" (17.5cm) measuring depth see >>Electrode E16>>

The slide hammer is moved up and down to drive the pins in and out of the wood. Teflon-insulated pins measure only between the tips and give core readings even if the surface is wet. The professional tool to obtain true core readings. Ideal for checking sub floors without removing floor boards or measuring fiber boards through stucco or testing structural lumber.

Electrode E12, including 1 pair DZ pins and 1 pair DA pins

weight 3.5pds (1600g), length w/o pins 12" (30cm)

Pins for E12

Teflon-insulated pins for Electrode E12 only:

DZ: Measuring depth 1" (25mm), total length 1 5/8" (42mm)

DA: Measuring depth 1.5" (37mm), total length 1 5/8" (53mm)

DB: Measuring depth 2" (50mm), total length 2 5/8" (68mm)

Cable for E12

The BNC-mini Cable connects the Electrode E12 to the

mini-Ligno DX/C. The cable has 2mm plugs on one

end and a BNC connector on the other end.

Standard cable length is 3 ft (1m), available also 6ft (2m).

BNC-mini Cable (3ft)

Case

The black hardshell case has a double wall for sturdiness and a

foam insert for protection.

For mini-Ligno DX/C, Ligno-Scanner D, Thermo-Hygrometer TH Electrode E12 and BNC-mini Cable and Electrode E16 and E16-mini Cable, 1 pair each DZ, DA, EC pins

Case M: Size 13"x10"x4" (33x25x10cm)