|
|
||||
PK Probes for In-Kiln Readings
Given length of pins and probes listed below is actual measuring depth, not overall length.
|
|
|
|
|
|
|
|
PK Probes
for
In-Kiln
Readings |
 |
 |
|||
|
The insulated PK-Probes are set into pre-drilled holes in the wood about 1 1/4" apart. A pulling Tool #PT is available to place the probes correctly and to remove the probes easily. At any time the a cable can be connected to obtain moisture readings. Given length of probe is measuring depth, dia 1/8" (3mm): PKA: 1/2" (12.5mm) long for up to 4/4 or 5/4 lumber PKB: 3/4" (19.5mm) long for up to 6/4 lumber PKC: 1" (25mm) long for up to 8/4 lumber PKD: 1 1/2" (38mm) long for up to 16/4 lumber PKE: 2 3/4" (70mm) long over 16/4 lumber Pulling Tool PT |
Ideal for monitoring stacks of lumber during air-drying, in predryers and kilns or during storage. The PK-Probe System has been popular for many years with owners of small dry kilns as an inexpensive way to reach the center of the load. |
||||
|
|
|
|
|
|
|
 |
Each PK-mini Cable connects one pair of PK-Probes to a mini-Ligno C-Model . One splitend of the Cable has 5/64" (2mm) Plugs to fit the mini-Ligno C's. The other split end has 5/32"(4mm) Plugs to fit the PK Probes. Standard cable length is 6 ft (2m) optional 12ft (4m). PK-mini Cable (6ft) PK-mini Cable (12ft) |
||||
 |
Each PK-H Cable connects one pair of PK-Probes to the Lignometer, Lignomaster or Ligno-VersaTec via Adaptor H. The Adaptor H is necessary to connect the split end cable to the meters. Standard cable length is 6 ft (2m). Cables are custom-made up to 50 ft (18m). Adaptor H PK-H Cable (6ft) PK-H Cable (12ft) |
||||
|
|
|||||
